- This topic has 1 reply, 1 voice, and was last updated 2 years, 8 months ago by
.
-
Topic
-
What min. distance between different phases shall be considered in switchgears?
Viewing 1 replies (of 1 total)
-
Replies
-
The clearances and creepage distances for open and enclosed indoor-type air-insulated busbars, as suggested by BS 159, are given in Tables 1 and 2 respectively. These values are considered for an altitude of up to 2000 m for LT and 1000 m for HT systems. For higher altitudes to achieve the same level of dielectric strength, the values of clearances and creepage distances, as given in Tables 1 and 2, may be increased by at least 1% for every 100 m rise in altitude.
Viewing 1 replies (of 1 total)
- You must be logged in to reply to this topic.